Volkswagen Remote Not Working: [Easy Fixes!]
Volkswagen Remote Not Working
As a Volkswagen technician, I’ve seen my fair share of Volkswagen remotes that don’t work. It’s a common problem that can be frustrating and inconvenient for Volkswagen owners. The good news is that it’s usually a quick and easy fix.
This guide will walk you through the steps to troubleshoot and potentially resolve the issue of your Volkswagen remote not working. I’ll start by explaining the different reasons why a Volkswagen remote might not be working, and then I’ll provide step-by-step instructions on how to diagnose and fix the problem.
By the end of this guide, you should have a working Volkswagen remote again. So let’s get started!
Why Volkswagen Remote Not Working
Dead Battery
The most common reason for a Volkswagen remote not working is a dead battery. The remote control uses a small battery to power the transmitter. When the battery dies, the remote will no longer be able to send a signal to the car.
Weak Signal
If the remote is not working properly, it may be because the signal is too weak. This can happen if there is something blocking the signal, such as a metal object or a wall. It can also happen if the remote is too far away from the car.
Interference
Another possible reason for a Volkswagen remote not working is interference. This can happen if there is another electronic device nearby that is sending out a signal on the same frequency as the remote. This could be a cordless phone, a baby monitor, or a wireless router.
Damaged Remote
Finally, a Volkswagen remote may not work if it is damaged. This could happen if the remote is dropped or if it gets wet. If the remote is damaged, it may need to be replaced.
How to Troubleshoot: Volkswagen Remote Not Working
Your Volkswagen remote is an important part of your car, allowing you to lock and unlock the doors, open the trunk, and start the engine. If your remote stops working, it can be a major inconvenience. Fortunately, there are a few things you can do to troubleshoot the problem and get your remote working again.
Step 1: Check the battery
The most common reason for a Volkswagen remote not working is a dead battery. To check the battery, open the remote and look for a small, round battery. If the battery is corroded or looks damaged, replace it with a new one.
Step 2: Test the remote
Once you’ve replaced the battery, test the remote to see if it’s working. Point the remote at your car and press the lock button. If the lights on your car flash, the remote is working. If the lights don’t flash, continue troubleshooting.
Step 3: Reset the remote
If the remote is not working, you may need to reset it. To reset the remote, follow these steps:
1. Press and hold the lock and unlock buttons on the remote for 5 seconds.
2. Release the buttons.
3. The remote will beep twice to indicate that it has been reset.
Step 4: Program the remote
If the remote is still not working, you may need to program it. To program the remote, follow these steps:
1. Insert the key into the ignition and turn it to the ON position.
2. Press and hold the lock button on the remote.
3. Within 5 seconds, press the unlock button on the remote.
4. The remote will beep twice to indicate that it has been programmed.
Step 5: Take your car to a dealership
If you’ve tried all of the above steps and your remote is still not working, you may need to take your car to a dealership. A dealership technician can diagnose the problem and repair or replace the remote as needed.
Conclusion
Your Volkswagen remote is an important part of your car, so it’s important to troubleshoot the problem if it stops working. By following the steps in this article, you can usually get your remote working again in no time.
Related Post To Read: Volkswagen Remote Start App Not Working