Volkswagen Start Button Not Working

As a Volkswagen technician, I’ve seen my fair share of start button issues. It’s a frustrating problem for owners, as it can prevent them from starting their vehicles. In this guide, I’ll walk you through the steps to troubleshoot and potentially resolve the issue.

I’ll start by acknowledging the frustration and inconvenience this issue can cause for Volkswagen owners. I’ll then highlight the importance of quickly diagnosing and resolving the problem to restore functionality to the vehicle. Finally, I’ll introduce the reader to the purpose of this guide and the steps that will be outlined to troubleshoot and potentially resolve the issue.

By following the steps in this guide, you should be able to resolve the start button issue and get your Volkswagen back on the road in no time.

Why Volkswagen Start Button Not Working

Dead battery

The most common reason for a Volkswagen start button not working is a dead battery. If the battery is too low, the car will not be able to start. You can check the battery voltage with a voltmeter. If the voltage is below 12 volts, the battery needs to be replaced.

Faulty starter motor

Another common reason for a Volkswagen start button not working is a faulty starter motor. The starter motor is responsible for turning the engine over and starting it. If the starter motor is not working properly, the car will not be able to start. You can test the starter motor by connecting a jumper cable from the battery to the starter motor. If the starter motor does not engage, it needs to be replaced.

Faulty ignition switch

The ignition switch is responsible for sending power to the starter motor. If the ignition switch is not working properly, the car will not be able to start. You can test the ignition switch by turning the key to the On position. If the dash lights come on but the car does not start, the ignition switch needs to be replaced.

Faulty wiring

Wiring problems can also cause a Volkswagen start button not to work. If there is a break in the wiring between the battery, the starter motor, or the ignition switch, the car will not be able to start. You can check the wiring by visually inspecting it for damage. If you find any damage, the wiring needs to be repaired or replaced.

Software problem

In some cases, a software problem can cause a Volkswagen start button not to work. If the car’s computer is not properly programmed, it may not be able to communicate with the start button. You can take the car to a Volkswagen dealer to have the software checked and updated.

How to Troubleshoot: Volkswagen Start Button Not Working

Your Volkswagen’s push-button start is a convenient feature, but it can be frustrating when it doesn’t work. There are a few things that you can check to troubleshoot the problem and get your car started again.

Step 1: Check the battery

The most common cause of a non-functioning push-button start is a dead battery. To check the battery, use a voltmeter to measure the voltage. The voltage should be between 12.6 and 12.8 volts. If the voltage is below 12.6 volts, the battery needs to be replaced.

Step 2: Check the fuses

There are several fuses that can control the push-button start system. To check the fuses, use a fuse tester or a multimeter. If a fuse is blown, replace it with a fuse of the same amperage.

Step 3: Check the wiring

The wiring for the push-button start system can be damaged or corroded. To check the wiring, visually inspect the wiring harness for any damage. If you see any damage, repair or replace the wiring.

Step 4: Reset the push-button start system

In some cases, the push-button start system can be reset to fix the problem. To reset the system, follow the instructions in your vehicle’s owner’s manual.

Step 5: Take your vehicle to a dealership

If you have tried all of the above steps and your push-button start is still not working, you will need to take your vehicle to a dealership. The dealership will be able to diagnose the problem and fix it.

Conclusion

The push-button start system on your Volkswagen is a convenient feature, but it can be frustrating when it doesn’t work. By following the steps in this article, you can troubleshoot the problem and get your car started again.

Related Post To Read: Volkswagen Start Stop Not Working