Volkswagen Push To Start Not Working

As a Volkswagen technician, I have seen firsthand the frustration and inconvenience that can be caused by a malfunctioning push-to-start system. This issue can prevent drivers from starting their vehicles, which can lead to missed appointments, late deliveries, and other problems.

The purpose of this guide is to help Volkswagen owners troubleshoot and potentially resolve a push-to-start issue. I will walk you through the steps involved in diagnosing the problem, and I will provide tips on how to fix it. By following these steps, you can quickly and easily get your Volkswagen back on the road.

A malfunctioning push-to-start system can be a major inconvenience for Volkswagen owners. This issue can prevent drivers from starting their vehicles, which can lead to missed appointments, late deliveries, and other problems.

The good news is that most push-to-start problems can be diagnosed and resolved relatively easily. In this guide, I will walk you through the steps involved in troubleshooting a push-to-start issue. I will also provide tips on how to fix the problem.

By following these steps, you can quickly and easily get your Volkswagen back on the road.

Why Volkswagen Push To Start Not Working

Dead Battery

The most common reason for a push-to-start Volkswagen not working is a dead battery. If the battery is too low, the car will not be able to start. To check the battery, use a voltmeter to measure the voltage. If the voltage is below 12 volts, the battery needs to be replaced.

Faulty Push-to-Start Button

Another common cause of a push-to-start Volkswagen not working is a faulty push-to-start button. The button may be stuck, or it may not be sending the correct signal to the car’s computer. To check the push-to-start button, try pressing it multiple times. If the car still does not start, the button may need to be replaced.

Faulty Ignition Switch

The ignition switch is responsible for sending the signal from the push-to-start button to the car’s computer. If the ignition switch is faulty, the car will not be able to start. To check the ignition switch, try turning the key in the ignition. If the car does not start, the ignition switch may need to be replaced.

Faulty Engine Control Module (ECM)

The ECM is responsible for controlling the engine. If the ECM is faulty, the car will not be able to start. To check the ECM, a scan tool will need to be used. If the ECM is faulty, it will need to be replaced.

Other Causes

There are a number of other potential causes for a push-to-start Volkswagen not working. These include:

A loose or damaged wiring harness
A faulty starter motor
A faulty fuel pump
A faulty fuel injector
A faulty spark plug

If you are having trouble starting your Volkswagen, it is best to take it to a qualified Volkswagen dealer or repair shop for diagnosis and repair.

How to Troubleshoot: Volkswagen Push to Start Not Working

Your Volkswagen’s push-to-start system is a convenient way to start your car without having to take your keys out of your pocket. However, if your push-to-start system isn’t working, it can be a major inconvenience. Here are some tips on how to troubleshoot a Volkswagen push-to-start system that isn’t working.

Step 1: Check the battery

The first thing you should do is check the battery. A dead battery can prevent the push-to-start system from working. To check the battery, use a voltmeter to measure the voltage. The battery should have a voltage of at least 12.6 volts. If the battery voltage is below 12.6 volts, you will need to replace the battery.

Step 2: Check the fuses

If the battery is good, the next thing you should check is the fuses. There are two fuses that are related to the push-to-start system: the starter fuse and the ignition fuse. To check the fuses, use a fuse tester. If either fuse is blown, you will need to replace it.

Step 3: Check the wiring

If the battery and fuses are good, the next thing you should check is the wiring. The wiring for the push-to-start system is located under the dash. To check the wiring, you will need to use a voltmeter. You should measure the voltage at the starter relay and the ignition switch. If there is no voltage at either of these locations, there is a problem with the wiring.

Step 4: Reset the system

If you have checked the battery, fuses, and wiring and everything is good, the next thing you should do is reset the system. To reset the system, you will need to disconnect the battery for a few minutes. Then, reconnect the battery and try starting the car.

Step 5: Take it to a mechanic

If you have tried all of the above steps and the push-to-start system is still not working, you will need to take it to a mechanic. A mechanic will be able to diagnose the problem and fix it.

Conclusion

The push-to-start system on your Volkswagen is a convenient feature, but it can be a nuisance if it isn’t working properly. By following these tips, you can troubleshoot a Volkswagen push-to-start system that isn’t working.

Related Post To Read: Volkswagen Radiator Fan Not Working