Volkswagen Polo Back Wiper Off [Step-By-Step Fixes]

As a Volkswagen owner, you know that your car is a reliable and stylish way to get around. But even the best cars can have problems from time to time. One common issue that Volkswagen Polo owners experience is a back wiper that won’t work. This can be a major inconvenience, especially in rainy weather. But don’t worry, there’s a simple fix! In this troubleshooting guide, I’ll walk you through the steps to diagnose and repair a Volkswagen Polo back wiper that won’t work. So if you’re ready to get your wiper back in action, let’s get started!

So, Why Volkswagen Polo Back Wiper Off?

Here Are Some Reasons Mentioned Below

1. Faulty Wiper Motor

The wiper motor is responsible for moving the wiper blades back and forth. If the motor is faulty, it may not be able to move the blades at all, or it may move them erratically. This can cause the back wiper to stop working.

2. Faulty Wiper Switch

The wiper switch is responsible for sending power to the wiper motor. If the switch is faulty, it may not be able to send power to the motor, or it may send power intermittently. This can also cause the back wiper to stop working.

3. Faulty Wiring

The wiring between the wiper switch and the wiper motor can become damaged or corroded. This can prevent power from reaching the motor, or it can cause the motor to receive incorrect signals. This can also cause the back wiper to stop working.

4. Foreign Object in the Wiper Motor

A foreign object, such as a piece of dirt or a pebble, can get caught in the wiper motor and prevent it from moving. This can cause the back wiper to stop working.

5. Frozen Wiper Blades

If the wiper blades are frozen to the windshield, they will not be able to move. This can cause the back wiper to stop working.

How to Troubleshoot: Volkswagen Polo Back Wiper Off

Symptoms

The rear wiper does not work when you turn the switch on.
The rear wiper works intermittently or only works on one side.
The rear wiper makes a noise but does not move.
The rear wiper motor is hot to the touch.

Causes

There are a few possible causes for a Volkswagen Polo back wiper that is not working. These include:

A faulty rear wiper switch.
A faulty rear wiper motor.
A faulty rear wiper linkage.
A faulty rear wiper fuse.
A dirty or damaged rear wiper blade.

Diagnosis

To diagnose the cause of a Volkswagen Polo back wiper that is not working, you will need to:

1. Check the rear wiper switch. Make sure that the switch is turned on and that the fuse for the rear wiper is not blown.
2. Inspect the rear wiper motor. Look for signs of damage or corrosion. If the motor is hot to the touch, it may be faulty.
3. Check the rear wiper linkage. Make sure that the linkage is not damaged or corroded.
4. Check the rear wiper fuse. If the fuse is blown, replace it with a new one.
5. Clean or replace the rear wiper blade. If the blade is dirty or damaged, it may not be able to make contact with the windshield and will not work properly.

Repair

Once you have diagnosed the cause of the problem, you can repair the Volkswagen Polo back wiper by:

Replacing the faulty rear wiper switch.
Replacing the faulty rear wiper motor.
Replacing the faulty rear wiper linkage.
Replacing the blown rear wiper fuse.
Cleaning or replacing the rear wiper blade.

Prevention

To prevent problems with your Volkswagen Polo back wiper, you can:

Keep the rear wiper blades clean and in good condition.
Inspect the rear wiper linkage regularly for signs of damage or corrosion.
Replace the rear wiper fuse if it blows.
Avoid driving through puddles or other water hazards that could damage the rear wiper motor.

Conclusion

If your Volkswagen Polo back wiper is not working, you can troubleshoot the problem by checking the rear wiper switch, the rear wiper motor, the rear wiper linkage, the rear wiper fuse, and the rear wiper blade. Once you have diagnosed the cause of the problem, you can repair it by replacing the faulty component.

Also Read: Volkswagen Traton Spin Off

FAQs: Volkswagen Polo Back Wiper Off

How do I turn off the back wiper on my Volkswagen Polo?

To turn off the back wiper on your Volkswagen Polo, follow these steps:

1. Turn the ignition switch to the On position.
2. Press and hold the Wipers stalk until the back wiper stops.
3. Release the Wipers stalk.

The back wiper will now be turned off.

Why is my Volkswagen Polo back wiper not working?

There are a few reasons why your Volkswagen Polo back wiper might not be working. Here are some of the most common causes:

The wiper motor is faulty: If the wiper motor is not working, the wiper blades will not move.

The wiper switch is faulty: If the wiper switch is not working, the wiper blades will not move.

The wiper linkage is damaged: If the wiper linkage is damaged, the wiper blades will not move.

The wiper fluid reservoir is empty: If the wiper fluid reservoir is empty, the wiper blades will not be able to spray fluid onto the windshield.

If you are not sure why your Volkswagen Polo back wiper is not working, it is best to take your car to a qualified mechanic for diagnosis and repair.

How do I replace the wiper blades on my Volkswagen Polo?

To replace the wiper blades on your Volkswagen Polo, follow these steps:

1. Park your car in a well-lit area.
2. Turn off the ignition switch.
3. Open the hood of your car.
4. Locate the wiper arms.
5. Remove the old wiper blades by gently prying them off of the wiper arms.
6. Install the new wiper blades by snapping them onto the wiper arms.
7. Close the hood of your car.

How do I adjust the wipers on my Volkswagen Polo?

To adjust the wipers on your Volkswagen Polo, follow these steps:

1. Turn on the ignition switch.
2. Press and hold the Wipers stalk until the wiper blades stop.
3. Release the Wipers stalk.
4. Use the Wipers stalk to adjust the position of the wiper blades.
5. Press and hold the Wipers stalk until the wiper blades stop.
6. Release the Wipers stalk.

The wipers on your Volkswagen Polo are now adjusted.

How do I clean the wiper blades on my Volkswagen Polo?

To clean the wiper blades on your Volkswagen Polo, follow these steps:

1. Park your car in a well-lit area.
2. Turn off the ignition switch.
3. Open the hood of your car.
4. Locate the wiper arms.
5. Remove the old wiper blades by gently prying them off of the wiper arms.
6. Use a damp cloth to clean the wiper arms.
7. Use a dry cloth to dry the wiper arms.
8. Install the new wiper blades by snapping them onto the wiper arms.
9. Close the hood of your car.