Volkswagen Jetta Ac Not Working: [Causes & Proven Fixes]
As a certified Volkswagen service technician, I have seen many cases of Volkswagen Jetta AC not working. This is a common problem that can be frustrating and inconvenient for drivers. The good news is that it is usually a simple issue to diagnose and fix. In this guide, I will walk you through the steps to troubleshoot the problem and get your AC back up and running.
Why Volkswagen Jetta Ac Not Working
Low Refrigerant Level
The most common cause of a Volkswagen Jetta AC not working is a low refrigerant level. The refrigerant is a gas that helps to cool the air inside the car. If the refrigerant level is too low, the AC will not be able to cool the air effectively.
Faulty Compressor
The compressor is the heart of the AC system. It is responsible for compressing the refrigerant gas and sending it through the evaporator coil. If the compressor is faulty, it will not be able to compress the refrigerant gas and the AC will not work.
Faulty Expansion Valve
The expansion valve is a small valve that controls the flow of refrigerant gas through the evaporator coil. If the expansion valve is faulty, it will not be able to regulate the flow of refrigerant gas and the AC will not work properly.
Faulty Condenser
The condenser is a radiator-like device that cools the refrigerant gas after it has been compressed by the compressor. If the condenser is faulty, it will not be able to cool the refrigerant gas and the AC will not work.
Faulty Evaporator Coil
The evaporator coil is a metal coil that is located inside the dashboard. The refrigerant gas flows through the evaporator coil and absorbs heat from the air inside the car. If the evaporator coil is faulty, it will not be able to absorb heat from the air and the AC will not work.
Faulty Thermostat
The thermostat is a temperature sensor that controls the operation of the AC system. If the thermostat is faulty, it will not be able to properly regulate the temperature of the air inside the car and the AC will not work properly.
Faulty Control Unit
The control unit is a computer that controls the operation of the AC system. If the control unit is faulty, it will not be able to properly control the operation of the AC system and the AC will not work.
How to Troubleshoot: Volkswagen Jetta AC Not Working
Your Volkswagen Jetta’s air conditioner is a vital part of keeping you cool and comfortable during the hot summer months. But what happens when your AC stops working? Not only is it uncomfortable, but it can also be dangerous if you’re driving in hot weather.
If your Volkswagen Jetta AC is not working, there are a few things you can do to troubleshoot the problem. In this article, we’ll walk you through the steps of troubleshooting a Volkswagen Jetta AC that’s not working.
Step 1: Check the fuses
The first thing you should do is check the fuses in your Volkswagen Jetta. The AC fuse is typically located in the fuse box under the hood. To check the fuse, remove it from the fuse box and look for any signs of damage. If the fuse is blown, replace it with a new one that is the same amperage.
Step 2: Check the compressor clutch
The compressor clutch is a small electrical motor that engages the compressor to start the AC. To check the compressor clutch, turn on the AC and listen for a whining noise. If you don’t hear a whining noise, the compressor clutch may be bad. You can also check the compressor clutch by using a voltmeter. Connect the voltmeter to the battery and the compressor clutch. If the voltmeter reads 0 volts, the compressor clutch is bad.
Step 3: Check the condenser
The condenser is a radiator-like device that cools the refrigerant gas. To check the condenser, look for any signs of damage. If the condenser is damaged, it will need to be replaced. You can also check the condenser by using a pressure gauge. Connect the pressure gauge to the high-pressure side of the AC system. If the pressure is too low, the condenser may be bad.
Step 4: Check the evaporator
The evaporator is a small radiator-like device that cools the air inside the car. To check the evaporator, look for any signs of damage. If the evaporator is damaged, it will need to be replaced. You can also check the evaporator by using a pressure gauge. Connect the pressure gauge to the low-pressure side of the AC system. If the pressure is too low, the evaporator may be bad.
Step 5: Check the refrigerant level
The refrigerant level should be checked regularly to ensure that the AC system is working properly. To check the refrigerant level, use a refrigerant manifold gauge. Connect the manifold gauge to the high-pressure and low-pressure sides of the AC system. The refrigerant level should be between the full and add marks on the manifold gauge. If the refrigerant level is too low, you will need to add refrigerant to the system.
Step 6: Inspect the AC lines
The AC lines are the hoses that carry the refrigerant gas through the AC system. To inspect the AC lines, look for any signs of damage. If the AC lines are damaged, they will need to be replaced. You can also check the AC lines for leaks by using a leak detector.
Step 7: Inspect the AC compressor
The AC compressor is a small pump that pressurizes the refrigerant gas. To inspect the AC compressor, look for any signs of damage. If the AC compressor is damaged, it will need to be replaced. You can also check the AC compressor by using a voltmeter. Connect the voltmeter to the battery and the AC compressor. If the voltmeter reads 0 volts, the AC compressor is bad.
Step 8: Inspect the AC control unit
The AC control unit is the computer that controls the AC system. To inspect the AC control unit, look for any signs of damage. If the AC control unit is damaged, it will need to be replaced. You can also check the AC control unit by using a diagnostic scanner.
Conclusion
If you have followed these steps and you are still unable to troubleshoot the problem, you should take your Volkswagen Jetta to a qualified mechanic.
Next Post to Read: Volkswagen Tiguan Remote Start Not Working