Volkswagen Id3 Wing Mirrors Not Working: [Reasons & Fixes]

As a certified Volkswagen service technician, I understand the frustration and inconvenience that can come with a malfunctioning side mirror. Not only can it be a safety hazard, but it can also be a major inconvenience. That’s why I’ve created this troubleshooting guide to help you quickly diagnose and resolve the issue. In this guide, I’ll walk you through the steps to check the fuses, wiring, and mirrors themselves. I’ll also provide tips on how to prevent this issue from happening again in the future. So if your Volkswagen ID3’s side mirrors are not working, read on for help!

Why Volkswagen Id3 Wing Mirrors Not Working

Electrical Fault

The most common reason for Volkswagen ID3 wing mirrors not working is an electrical fault. This can be caused by a faulty wiring harness, a blown fuse, or a problem with the electronic control unit (ECU).

Mechanical Fault

A mechanical fault can also cause Volkswagen ID3 wing mirrors not to work. This could be caused by a broken mirror motor, a faulty mirror adjustment switch, or a problem with the door hinge.

Other Causes

Other causes of Volkswagen ID3 wing mirrors not working include:

A stuck or damaged mirror glass
A blocked mirror adjustment mechanism
A loose or missing mirror mounting screw

How to Troubleshoot: Volkswagen ID3 Wing Mirrors Not Working

Overview

Your Volkswagen ID3’s wing mirrors are an important safety feature, providing you with a wide field of vision and helping you to see around obstacles when changing lanes or reversing. If your wing mirrors are not working, it can be dangerous to drive, as you may not be able to see other vehicles or obstacles in your blind spot.

There are a number of things that could cause your Volkswagen ID3’s wing mirrors to stop working, including:

A faulty wiring harness
A broken mirror motor
A faulty mirror switch
A problem with the car’s body control module (BCM)

In this article, we will walk you through the steps to troubleshoot your Volkswagen ID3’s wing mirrors and identify the cause of the problem.

Step 1: Check the wiring harness

The first step is to check the wiring harness for any damage. The wiring harness is a bundle of wires that connects the wing mirrors to the car’s electrical system. If the wiring harness is damaged, it can cause the wing mirrors to stop working.

To check the wiring harness, you will need to:

1. Open the door panel on the side of the wing mirror that is not working.
2. Locate the wiring harness that connects to the wing mirror.
3. Inspect the wiring harness for any damage, such as frayed wires or broken connectors.

If you find any damage to the wiring harness, you will need to have it repaired or replaced.

Step 2: Check the mirror motor

The next step is to check the mirror motor. The mirror motor is a small electric motor that moves the wing mirrors up and down. If the mirror motor is broken, it can cause the wing mirrors to stop working.

To check the mirror motor, you will need to:

1. Remove the wing mirror from the car.
2. Inspect the mirror motor for any damage.
3. Connect a voltmeter to the mirror motor terminals.
4. Turn on the ignition switch.
5. Move the mirror switch to the up or down position.

If the mirror motor is working properly, you should see the voltmeter reading increase. If the voltmeter reading does not increase, the mirror motor is probably broken and will need to be replaced.

Step 3: Check the mirror switch

The next step is to check the mirror switch. The mirror switch is a small switch that controls the operation of the wing mirrors. If the mirror switch is broken, it can cause the wing mirrors to stop working.

To check the mirror switch, you will need to:

1. Locate the mirror switch on the dashboard.
2. Inspect the mirror switch for any damage.
3. Connect a voltmeter to the mirror switch terminals.
4. Turn on the ignition switch.
5. Move the mirror switch to the up or down position.

If the mirror switch is working properly, you should see the voltmeter reading increase. If the voltmeter reading does not increase, the mirror switch is probably broken and will need to be replaced.

Step 4: Check the BCM

The final step is to check the BCM. The BCM is a computer module that controls the operation of various electrical systems in the car, including the wing mirrors. If the BCM is faulty, it can cause the wing mirrors to stop working.

To check the BCM, you will need to:

1. Connect a diagnostic scanner to the car’s OBD-II port.
2. Select the BCM module.
3. Perform a diagnostic scan.

If the BCM is faulty, the diagnostic scanner will display a code. The code will indicate the specific problem with the BCM.

If you have checked all of the above and you are still unable to identify the problem, it is best to take your Volkswagen ID3 to a qualified Volkswagen dealer or repair shop.

Conclusion

By following these steps, you can troubleshoot your Volkswagen ID3’s wing mirrors and identify the cause of the problem. If you are unable to identify the problem, it is best to take your Volkswagen ID3 to a qualified Volkswagen dealer or repair shop.

Next Post to Read: Volkswagen Infotainment Not Working