How To Take Off Volkswagen Wheel (Get Answer)

How to Take Off a Volkswagen Wheel

Removing a Volkswagen wheel is a relatively simple task that can be completed in a few minutes with the right tools. This guide will walk you through the steps of removing a Volkswagen wheel, including

Identifying the lug nuts
Loosening the lug nuts
Removing the wheel

Tools Needed

Lug wrench
Safety glasses
Penetrating oil (optional)

Steps

1. Park the vehicle on a level surface and apply the parking brake.
2. Engage the handbrake.
3. Remove the lug wrench from the trunk.
4. Locate the lug nuts on the wheel.
5. Spray the lug nuts with penetrating oil (optional).
6. Place the lug wrench on the lug nut and turn counterclockwise until the lug nut is loose.
7. Repeat steps 6 and 7 for each lug nut.
8. Use the lug wrench to lift the wheel off of the hub.
9. Place the wheel on the ground next to the vehicle.

How To Take Off Volkswagen Wheel

1. Park the vehicle on a level surface and apply the parking brake.
2. Remove the lug nuts from the wheel using a lug wrench.
3. Lift the car with a jack and place a jack stand under the frame.
4. Remove the lug nuts and the wheel.
5. Lower the car and remove the jack stands.

How to Take Off a Volkswagen Wheel

Tools Needed

Lug wrench
Jack
Safety chocks

Step 1: Park the Car

Park the car on a level surface. Turn off the engine and apply the parking brake. Engage the parking pawl by pushing down on the parking brake pedal until you hear a click.

Step 2: Locate the Lug Nuts

The lug nuts are located on the center of the wheel. There are usually five lug nuts per wheel.

Step 3: Loosen the Lug Nuts

Use the lug wrench to loosen the lug nuts. Turn the lug wrench counterclockwise.

Step 4: Raise the Car

Place the jack under the car, near the front or rear axle. Raise the car until the tire is off the ground.

Step 5: Remove the Lug Nuts

Completely remove the lug nuts.

Step 6: Remove the Wheel

Grasp the tire at the top and bottom and pull it straight up. The wheel should come off easily.

Step 7: Lower the Car

Lower the car until the tire is on the ground.

Step 8: Replace the Wheel

Place the wheel on the hub. Align the lug holes with the lug studs.

Step 9: Install the Lug Nuts

Install the lug nuts and tighten them by hand.

Step 10: Lower the Lug Nuts

Use the lug wrench to tighten the lug nuts. Turn the lug wrench clockwise.

Step 11: Lower the Car

Lower the car until the wheels are on the ground.

Step 12: Test the Wheels

Turn the steering wheel from side to side. Make sure the wheels are turning freely.

Step 13: Drive the Car

Drive the car around the block to make sure the wheels are installed correctly.

Also Read This: How To Unlock A Volkswagen Steering Wheel

FAQs on How to Take Off a Volkswagen Wheel

What tools do I need to remove a Volkswagen wheel?

You will need a lug wrench, a jack, and a chock.

How do I jack up my Volkswagen?

1. Find a safe spot to park your Volkswagen.
2. Engage the parking brake.
3. Place the chocks behind the front wheels.
4. Place the jack under the front of the vehicle, near the center of the wheel.
5. Turn the jack handle clockwise until the vehicle is raised enough to remove the wheels.

How do I remove the lug nuts?

1. Place the lug wrench on the lug nut and turn counterclockwise until it is loose.
2. Repeat for each lug nut.

How do I put the lug nuts back on?

1. Hand-tighten the lug nuts until they are snug.
2. Use the lug wrench to tighten the lug nuts in a star pattern.
3. Tighten the lug nuts to the specified torque.

How do I lower my Volkswagen?

1. Turn the jack handle counterclockwise until the vehicle is lowered to the ground.
2. Remove the chocks from the front wheels.