How To Take Off Volkswagen Wheel [Answered]
How to Take Off a Volkswagen Wheel
Removing a Volkswagen wheel is a simple task that can be completed in a few minutes. It is important to follow the steps in the correct order to avoid damaging the wheel or the vehicle. This guide will walk you through the process of removing a Volkswagen wheel, step-by-step.
So, How To Take Off Volkswagen Wheel
1. Park the vehicle on a level surface and apply the parking brake.
2. Remove the lug nuts from the wheel.
3. Use a tire iron to loosen the lug nuts until they are just barely tight enough to keep the wheel from spinning.
4. Place the tire iron on the lug nut furthest from you and turn it counterclockwise to remove the lug nut. Repeat for the remaining lug nuts.
5. Lift the wheel off of the vehicle and set it aside.
How to Take Off a Volkswagen Wheel
Tools Needed
Lug wrench
Jack
Safety chocks
Step 1: Park the Vehicle
Park the vehicle on a level surface and apply the parking brake. Turn the steering wheel all the way to the left or right. This will give you more clearance to work with.
Step 2: Place the Jack
Place the jack under the front or rear of the vehicle, near the tire you want to remove. Make sure the jack is stable and will support the weight of the vehicle.
Step 3: Raise the Vehicle
Raise the vehicle until the tire is just off the ground. Do not raise the vehicle too high, as this could damage the suspension.
Step 4: Loosen the Lug Nuts
Use the lug wrench to loosen the lug nuts on the tire you want to remove. Turn the lug nuts counterclockwise.
Step 5: Remove the Lug Nuts
Once the lug nuts are loose, you can remove them completely. Be careful not to drop the lug nuts, as they can be difficult to find.
Step 6: Remove the Tire
Grasp the tire at the top and bottom and pull it straight off the hub. Be careful not to damage the brake rotor or caliper.
Step 7: Lower the Vehicle
Lower the vehicle until the tire is resting on the ground.
Step 8: Replace the Tire
Place the new tire on the hub and hand-tighten the lug nuts.
Step 9: Tighten the Lug Nuts
Use the lug wrench to tighten the lug nuts in a star pattern. Tighten the lug nuts until they are snug, but do not overtighten them.
Step 10: Lower the Jack
Lower the jack until the vehicle is resting on the ground.
Step 11: Reinstall the Safety Chocks
Reinstall the safety chocks before driving away.
Also Read: How To Unlock A Volkswagen Steering Wheel
FAQs: How to Take Off a Volkswagen Wheel
What tools do I need to remove a Volkswagen wheel?
A lug wrench
A jack
A chock
How do I jack up my Volkswagen?
1. Find a safe spot to park your Volkswagen.
2. Engage the parking brake.
3. Place the chocks behind the front wheels.
4. Place the jack under the jacking point on the side of the vehicle you want to lift.
5. Slowly turn the jack handle until the vehicle is raised enough to remove the wheels.
How do I remove the lug nuts?
1. Place the lug wrench on the lug nut and turn counterclockwise until it is loose.
2. Repeat for all of the lug nuts.
How do I put the wheels back on?
1. Place the wheels on the studs.
2. Hand-tighten the lug nuts until they are snug.
3. Use the lug wrench to tighten the lug nuts in a star pattern.
4. Tighten the lug nuts to the specified torque.
What should I do if I can’t remove the lug nuts?
If you can’t remove the lug nuts, you may need to use a penetrating oil to loosen them. You can also try heating the lug nuts with a torch to make them easier to remove. If you are still unable to remove the lug nuts, you may need to take your vehicle to a mechanic.