How to Reset Oil Change Light on a Volkswagen Taos

How to Reset Oil Life on a Volkswagen Taos

The Volkswagen Taos is a compact SUV that comes standard with a 2.0-liter turbocharged four-cylinder engine. The oil life monitor on the Taos is designed to alert you when it’s time for an oil change. However, you may need to reset the oil life monitor if you change your oil yourself or if the oil life monitor is inaccurate.

This guide will show you how to reset the oil life monitor on a Volkswagen Taos. It’s a simple procedure that only takes a few minutes.

So, How To Reset Oil On Volkswagen Taos?

1. Turn the ignition to ON, but do not start the engine.
2. Press and hold the odometer reset button.
3. While holding the button, turn the ignition to OFF.
4. Release the button.
5. The oil change light will be reset.

How to Reset Oil on Volkswagen Taos

What You Need

A Volkswagen Taos
A Volkswagen Taos owner’s manual
A clean rag
A 10mm wrench
A 17mm wrench
Oil drain pan
Funnel
New oil filter
New oil

Steps

1. Park your Volkswagen Taos on a level surface.
2. Turn off the engine and allow it to cool down.
3. Engage the parking brake.
4. Open the hood and locate the oil drain plug.
5. Place the oil drain pan under the oil drain plug.
6. Use the 10mm wrench to loosen the oil drain plug.
7. Allow all of the oil to drain out of the oil pan.
8. Replace the oil drain plug and tighten it with the 17mm wrench.
9. Locate the oil filter.
10. Use the 17mm wrench to loosen the oil filter.
11. Apply a thin coat of new oil to the gasket of the new oil filter.
12. Screw on the new oil filter by hand until it is snug.
13. Open the oil filler cap.
14. Use the funnel to add new oil to the engine.
15. Add the amount of oil specified in the owner’s manual.
16. Close the oil filler cap.
17. Start the engine and let it run for a few minutes.
18. Turn off the engine.
19. Check the oil level on the dipstick.
20. Add more oil if necessary.

Resetting the Oil Life Monitor

Once you have added new oil to your Volkswagen Taos, you will need to reset the oil life monitor. To do this, follow these steps:

1. Turn on the ignition.
2. Press the Menu button on the steering wheel.
3. Scroll down to Vehicle Information.
4. Press the Select button on the steering wheel.
5. Scroll down to Oil Change.
6. Press the Select button on the steering wheel.
7. Press the Reset button on the steering wheel.

The oil life monitor will now be reset.

MUST READ THIS: How Big Is The Vw Taos

FAQs on How to Reset Oil on Volkswagen Taos

How do I reset the oil change light on my Volkswagen Taos?

1. Turn the ignition to the On position: Do not start the engine.
2. Press and hold the Oil Reset button: The oil change light will begin to flash.
3. Continue to hold the button until the light stops flashing and stays on: This indicates that the oil change has been reset.

How often do I need to change the oil in my Volkswagen Taos?

The oil change interval for your Volkswagen Taos depends on the type of oil you use and the driving conditions you experience. For most drivers, it is recommended to change the oil every 5,000 miles or 6 months, whichever comes first.

What type of oil do I need for my Volkswagen Taos?

The recommended oil type for your Volkswagen Taos is specified in your owner’s manual. You can also find this information on the oil cap.

How much oil do I need to add to my Volkswagen Taos?

The amount of oil you need to add to your Volkswagen Taos depends on the engine size. You can find this information in your owner’s manual.

What tools do I need to change the oil in my Volkswagen Taos?

You will need the following tools to change the oil in your Volkswagen Taos:

Oil drain pan
Funnel
Wrench
Oil filter wrench
New oil filter
New oil
Oil fill cap

You may also want to have a rag or two on hand to clean up any spills.