5 Easy Steps to Remove Your Volkswagen Jetta Headlights
How to Remove a Volkswagen Jetta Headlight
Objectively and concisely answer the question
This guide will show you how to remove the headlights on a Volkswagen Jetta. It’s a relatively simple procedure, but it’s important to follow the steps carefully to avoid damaging your vehicle.
So, How To Remove Volkswagen Jetta Headlight?
1. Open the hood.
2. Remove the two bolts securing the headlight assembly to the fender.
3. Disconnect the electrical connector from the back of the headlight assembly.
4. Pull the headlight assembly out of the fender.
How to Remove Volkswagen Jetta Headlight
Tools Needed
10mm socket
12mm socket
Torx T25 screwdriver
Torx T30 screwdriver
Flathead screwdriver
Wedge
Rag
Step 1: Remove the Headlight Cover
1. Open the hood of your Volkswagen Jetta.
2. Locate the headlight cover on the front of the car, just below the headlight.
3. Use the flathead screwdriver to pry up the tabs on the back of the headlight cover.
4. Pull the headlight cover off of the car.
Step 2: Disconnect the Wiring
1. Locate the wiring harness that connects to the back of the headlight.
2. Use the 10mm socket to loosen the nut that secures the wiring harness to the car.
3. Pull the wiring harness off of the car.
Step 3: Remove the Headlight
1. Locate the two bolts that secure the headlight to the car.
2. Use the 12mm socket to loosen the bolts.
3. Pull the headlight out of the car.
Step 4: Install the New Headlight
1. Reverse the steps above to install the new headlight.
2. Tighten the bolts to 18 ft-lbs.
3. Reconnect the wiring harness.
4. Replace the headlight cover.
Tips
Be careful not to damage the headlight when removing it.
Make sure that the new headlight is the correct one for your car.
Tighten the bolts to the correct torque specification.
MUST READ THIS: How To Remove Volkswagen Jetta Battery
FAQs: How to Remove Volkswagen Jetta Headlight
What tools do I need to remove a Volkswagen Jetta headlight?
You will need:
A Phillips head screwdriver
A Torx T20 screwdriver
A flathead screwdriver
A 10mm socket wrench
A 12mm socket wrench
A flashlight
How do I remove the headlight cover?
1. Open the hood of your Volkswagen Jetta.
2. Locate the headlight cover on the front of the vehicle.
3. Remove the two Phillips head screws that secure the headlight cover to the vehicle.
4. Use a flathead screwdriver to pry up the headlight cover.
5. Pull the headlight cover away from the vehicle.
How do I disconnect the headlight wiring?
1. Locate the headlight wiring harness on the back of the headlight assembly.
2. Disconnect the wiring harness from the headlight assembly by pressing down on the release tab and pulling the connector apart.
How do I remove the headlight assembly?
1. Remove the headlight cover.
2. Disconnect the headlight wiring harness.
3. Remove the two Torx T20 screws that secure the headlight assembly to the vehicle.
4. Remove the two 10mm bolts that secure the headlight assembly to the vehicle.
5. Pull the headlight assembly away from the vehicle.
How do I install the headlight assembly?
1. Reverse the removal steps.
2. Tighten the two Torx T20 screws to 10 Nm (7 ft-lbs).
3. Tighten the two 10mm bolts to 18 Nm (13 ft-lbs).
