How to install a VW emblem on your Jetta in 5 easy steps!

How to Install a VW Emblem on a Jetta

Are you looking to add a touch of personalization to your Volkswagen Jetta Installing a new VW emblem is a quick and easy way to do just that. In this guide, we’ll walk you through the process of replacing the factory emblem with a new one.

We’ll provide step-by-step instructions, along with photos and videos to help you along the way. By the end of this guide, you’ll be able to install a new VW emblem on your Jetta like a pro.

So, How To Install Vw Emblem Jetta?

How to install VW emblem Jetta

1. Remove the old emblem using a hairdryer to heat up the adhesive and a plastic pry tool to gently pry it off.
2. Clean the area around the emblem with rubbing alcohol.
3. Apply a small amount of adhesive to the back of the new emblem.
4. Position the new emblem and press it firmly into place.
5. Allow the adhesive to dry completely before driving the car.

How to Install VW Emblem Jetta

Tools Needed

Phillips head screwdriver
Torx T20 screwdriver
Rag
Goo Gone
New VW emblem

Step 1: Remove the old emblem

1. Locate the four Torx T20 screws that hold the emblem in place.
2. Use the Torx T20 screwdriver to remove the screws.
3. Use the rag to clean the area around the emblem.
4. Apply Goo Gone to the adhesive residue left by the old emblem.
5. Use the rag to wipe away the Goo Gone.

Step 2: Apply the new emblem

1. Align the new emblem with the mounting holes.
2. Press the emblem firmly into place.
3. Use the Phillips head screwdriver to tighten the screws.

Step 3: Test the emblem

1. Start the car and let it run for a few minutes.
2. Check to make sure the emblem is securely attached.
3. If the emblem is loose, tighten the screws again.

Congratulations! You have successfully installed a new VW emblem on your Jetta.

MUST READ THIS: Where Do You Put Transmission Fluid In A Volkswagen Jetta

Frequently Asked Questions about Installing VW Emblem on Jetta

1. How do I remove the old VW emblem from my Jetta?

To remove the old VW emblem from your Jetta
use a heat gun or hairdryer to warm the adhesive behind the emblem. Gently pry the emblem off using a plastic trim removal tool or fishing line. Clean any remaining adhesive residue with adhesive remover.

2. What tools do I need to install a new VW emblem on my Jetta?

You will need a heat gun or hairdryer
a plastic trim removal tool or fishing line for removing the old emblem
adhesive remover
and a clean cloth for preparing the surface for the new emblem.

3. How do I properly align the new VW emblem on my Jetta?

Before applying the new VW emblem
ensure that the surface is clean and dry. Use a measuring tape or the old emblem as a reference to align the new emblem properly. Apply even pressure to secure the emblem in place.

4. Can I install a custom or aftermarket VW emblem on my Jetta?

Yes
you can install a custom or aftermarket VW emblem on your Jetta. Ensure that the dimensions and mounting method of the new emblem are compatible with your Jetta model.

5. How do I make sure the new VW emblem stays securely attached to my Jetta?

After applying the new VW emblem
press firmly on the emblem to ensure proper adhesion. Avoid washing your car for at least 24 hours to allow the adhesive to set and bond effectively.