1. Park on level ground. Turn off the engine and allow it to cool.
2. Engage the parking brake.
3. Locate the oil filler cap. It is typically located on the top of the engine near the front.
4. Remove the oil filler cap.
5. Add new oil to the engine until the level reaches the full mark on the dipstick.
6. Replace the oil filler cap.
To put a 2019 VW Jetta in neutral, press the clutch pedal all the way down and move the gear selector to the N position.
To put a 2012 VW Jetta in neutral without the key, insert a flathead screwdriver into the slot above the brake pedal and turn 90 degrees.
To put a Volkswagen Jetta in reverse, press the clutch pedal all the way down, move the gear selector to the R position, and release the clutch pedal slowly.
Dead battery, faulty starter, bad fuel pump, or clogged fuel filter.
Misfires in a Volkswagen Jetta can be caused by a number of factors, including a dirty or faulty spark plug, a bad ignition coil, a weak fuel pump, or a clogged fuel filter.
Overheating Volkswagen Jetta
Faulty thermostat
Defective water pump
Clogged radiator
Low coolant level
1. Remove the two 10mm bolts that hold the VW emblem in place.
2. Carefully pry the emblem off the car.
3. Apply a thin coat of adhesive to the back of the new emblem.
4. Press the new emblem onto the car and hold it in place for 30 seconds.
How to Put Coolant in a Volkswagen Jetta
1. Park the vehicle on a level surface and turn off the engine.
2. Open the hood and locate the coolant reservoir.
3. Remove the cap from the coolant reservoir.
4. Add coolant to the reservoir until it reaches the full line.
5. Replace the cap and close the hood.
To put a VW Jetta in neutral without a key, insert a flathead screwdriver into the ignition slot and turn clockwise until the shifter moves into neutral.