5 Things to Consider Before You Swap Parts

The short answer is no, not all parts from a 1987 Volkswagen Cabriolet will fit a 1990 Volkswagen Cabriolet. However, some parts may be interchangeable, depending on the specific year and model of the vehicles. For example, the engines and transmissions of these two vehicles are not compatible, but some interior and exterior parts may be. It is always best to consult with a qualified Volkswagen technician to determine which parts are compatible between these two vehicles.

So Will Parts From A 1987 Fit A 1990 Volkswagen Cabriolet?

1. Make sure the part is compatible with your vehicle:

2. Check the part’s warranty:

3. Find a reputable source for the part:

4. Install the part correctly:

5. Test the part to make sure it’s working properly:

Will Parts from a 1987 Fit a 1990 Volkswagen Cabriolet?

You’re a Volkswagen Cabriolet owner and you’re wondering if parts from a 1987 model will fit your 1990 model. The answer is: it depends.

Body

The Volkswagen Cabriolet was produced from 1983 to 1993. During that time, there were a number of changes made to the car, including the engine, transmission, and suspension.

So, if you’re looking to swap out a part on your 1990 Cabriolet with a part from a 1987 model, you need to make sure that the two parts are compatible.

Engine

The 1987 Cabriolet came with either a 2.0-liter or 2.8-liter engine. The 1990 Cabriolet came with a 2.9-liter engine.

If you’re looking to swap out an engine, you need to make sure that the two engines are the same size and have the same number of cylinders. You also need to make sure that the engine mounts are compatible.

Transmission

The 1987 Cabriolet came with either a 5-speed manual or 4-speed automatic transmission. The 1990 Cabriolet came with a 5-speed manual or 4-speed automatic transmission.

If you’re looking to swap out a transmission, you need to make sure that the two transmissions are the same type and have the same number of gears. You also need to make sure that the transmission mounts are compatible.

Suspension

The 1987 Cabriolet had a different suspension setup than the 1990 Cabriolet. The 1987 Cabriolet had a front MacPherson strut suspension and a rear semi-trailing arm suspension. The 1990 Cabriolet had a front MacPherson strut suspension and a rear multi-link suspension.

If you’re looking to swap out a suspension component, you need to make sure that the two components are compatible.

Conclusion

In general, it’s best to stick with original equipment manufacturer (OEM) parts when repairing or upgrading your Volkswagen Cabriolet. However, if you’re looking for a cheaper alternative, you can sometimes find compatible parts from other models.

Just be sure to do your research and make sure that the parts you’re buying are compatible with your car.

You Needs to Read THIS =>: Why Are Volkswagen Parts Expensive

FAQs

Will parts from a 1987 Volkswagen Cabriolet fit a 1990 Volkswagen Cabriolet?

No, parts from a 1987 Volkswagen Cabriolet will not fit a 1990 Volkswagen Cabriolet. The two models have different body styles and engine configurations.

What parts are not interchangeable between a 1987 Volkswagen Cabriolet and a 1990 Volkswagen Cabriolet?

The following parts are not interchangeable between a 1987 Volkswagen Cabriolet and a 1990 Volkswagen Cabriolet:

Body panels
Engine
Transmission
Drivetrain
Suspension
Brakes
Electrical system

Can I use a 1987 Volkswagen Cabriolet engine in a 1990 Volkswagen Cabriolet?

No, you cannot use a 1987 Volkswagen Cabriolet engine in a 1990 Volkswagen Cabriolet. The two engines are different sizes and have different engine mounts.

Can I use a 1990 Volkswagen Cabriolet transmission in a 1987 Volkswagen Cabriolet?

No, you cannot use a 1990 Volkswagen Cabriolet transmission in a 1987 Volkswagen Cabriolet. The two transmissions are different sizes and have different gear ratios.

Can I use a 1990 Volkswagen Cabriolet body in a 1987 Volkswagen Cabriolet?

No, you cannot use a 1990 Volkswagen Cabriolet body in a 1987 Volkswagen Cabriolet. The two bodies are different shapes and have different mounting points.